计划每年招收博士研究生1名，硕士研究生2-3名

2013.7-至今 南京理工大学 材料科学与工程学院 纳米异构材料中心 

2008.9-2013.6 山东大学 材料科学与工程学院           博士研究生

2004.9-2008.6 山东大学 材料科学与工程学院(基地班)  本科

入选国家重大人才工程青年学者（2023）

山东省技术发明一等奖1项（3/6）

教育部高等学校科学研究优秀成果奖二等奖1项（3/6）

南京理工大学2020-2021年度优秀教师（2022）

江苏高校“青蓝工程”优秀青年骨干教师（2022）

《中国有色金属学报》第一届优秀青年编委（2024）

担任《中国有色金属学报》中英文版、《材料工程》、《航空材料学报》、《China Foundry》、《特种铸造及有色合金》、《精密成形工程》青年编委，长期担任Journal of Alloys and Compounds、Mater. Sci. Eng. A、Composite Part B、Mater Res Lett、《金属学报》、《特种铸造及有色合金》等多个金属 材料期刊的审稿专家。

主持和参与国家自然科学基金及省部级课题十余项：

国家自然科学基金面上项目，颗粒增强异构耐热铝合金的强韧化及其抗蠕变机制研究，2023-2026，负责人

国家自然科学基金面上项目：纳米粒子界面微梯度诱导的高强铝合金塑韧化机制，2021-2024，负责人

国家自然科学基金重点项目：基于前驱团簇演变及纳米粒子网构筑耐热铝合金的基础研究（课题负责人）

国家自然科学基金重点项目：金属材料跨尺度异构的强韧化及微结构调控（骨干参与）

国家自然科学基金青年基金：铝合金熔体中B/P元素诱导TiC_x结构转变机制的研究，2016-2018，负责人

江苏省自然科学基金面上项目：颗粒增强铝基复合材料的界面梯度构筑与强韧化机制，2022-2025，负责人

中国博士后基金一类资助：核壳结构TiB2粒子的熔体反应合成与异质形核机制研究，2014-2016 负责人

横向课题：高强韧Al-Cu系铝合金的设计开发，2022-2024，负责人

国家自然科学基金面上项目：旋锻变形技术制备高强、高导、高热稳定、低成本的可工业化应用的纳米/超细晶铜、铝合金导线的探索研究（参与）

JW科技委项目：XXX材料设计，2021-2024 骨干参与

国家重点研发计划“纳米”专项：新型纳米金属材料的构筑及使役行为研究，2017-2022，骨干参与

中央高校基本科研业务费：基于纳米粒子界面微梯度调控的铝合金强韧化机制研究 2019-2022

中央高校基本科研业务费：铝熔体中B元素诱导的TiC_x结构转变及其衍生相异质形核机制研究 2015-2017

近年来在金属材料领域TOP期刊发表SCI论文70余篇，代表性论文：

1. Daoxiu Li, Xirui Yan, Yong Fan, Guiliang Liu, Jinfeng Nie*, Xiangfa Liu*, Sida Liu*. An anti Si/Zr-poisoning strategy of Al grain refinement by the evolving effect of doped complex, Acta Materialia, 249(2023) 118812.
2. Jinfeng Nie*, Yuyao Chen, Lei Song, Yong Fan, Yang Cao, Yonghao Zhao*, Yuntian Zhu*, et al. Enhancing strength and ductility of Al-matrix composite via a dual-heterostructure strategy, International Journal of Plasticity, 171(2023) 103825
3. Huabing Yang, Zhao Qian, Houwen Chen, Xiaojun Zhao, Guang Han, Wenzheng Du, Xi Nie, Kai Zhao, Guiliang Liu, Qianqian Sun, Tong Gao, Jixue Zhou, Jinfeng Nie*, Xiangfa Liu*. A new insight into heterogeneous nucleation mechanism of Al by non-stoichiometric TiCx, Acta Materialia, 233(2022) 117977.
4. Kewei Xie, Jinfeng Nie*, Chang Liu, Wenhao Cha, Ge Wu, Xiangfa Liu, Sida Liu. A Novel Al–Cu Composite with Ultra-High Strength at 350 °C via Dual-Phase Particle Reinforced Submicron-Structure, Advanced Science,2023, 10, 2207208,
5. Yong Fan, Jinfeng Nie*, Zhigang Ding, Yujing Zhang, Xiang Chen, Wei Liu, Sen Yang, Sida Liu, Xiangfa Liu, Yonghao Zhao. A facile high-efficiency preparation strategy for Al-containing multi-component boride microcrystals with superior comprehensive performance, Journal of Materials Science & Technology, 204(2025),190-203
6. Jinfeng Nie*, Yating Zhi, Yong Fan, et al. One-step synthesis of high-entropy diborides with hierarchy structure and high hardness via aluminum-melt reaction method, Materials Research Letters, 12(2)(2024): 88-96
7. Yue Yang, Xiang Chen*, Jinfeng Nie*, Kang Wei, Qingzhong Mao, Fenghua Lu, Yonghao Zhao*. Achieving ultra-strong Magnesium-lithium alloys by low-strain rotary swaging, Materials Research Letters, 9(2021) 255-262
8. Kai Zhao, Guang Han, Tong Gao, Huabing Yang, Zhao Qian, Kaiqi Hu, Guiliang Liu, Jinfeng Nie*, Xiangfa Liu*. Interface precipitation and corrosion mechanisms in a model Al-Zn-Mg-Cu alloy strengthened by TiC particles, Corrosion Science, 206(2022) 110533.
9. Xinda Sun, Yong Fan, Jinfeng Nie* Yonghao Zhao, et al. Significant improvement of the room and cryogenic mechanical properties of an AlN particle reinforced Al matrix composite by alloying element magnesium, Composite Part B：Engineering, 268(2024) 111056
10. Qingzhong Mao, Long Wang, Jinfeng Nie*, Yonghao Zhao*. Enhancing strength and electrical conductivity of Cu-Cr composite wire by two-stage rotary swaging and aging treatments, Composites Part B: Engineering, 231(2022) 109567.
11. Jinfeng Nie, Yuyao Chen, Xiangfa Liu*, Yonghao Zhao*, Yuntian Zhu. Stiff, strong and ductile heterostructured aluminum composites reinforced with oriented nanoplatelets, Scripta Materialia, 189 (2020) 140-144.
12. Jinfeng Nie, Haimin Ding, Yuying Wu, Xiangfa Liu. Fabrication of titanium diboride–carbon core–shell structure particles and their application as high-efficiency grain refiners of wrought aluminum alloys, Scripta Materialia, 68(2013) 789-792.
13. Mengqi Jiang, Yuli Wu, Jinfeng Nie*, Yuyao Chen, Yong Fan, Xiangfa Liu, Yonghao Zhao. Revealing the ultra-high high-temperature compressive mechanical properties and deformation mechanism of a heterostructured AlNp/Al nanocomposite, Materials Science and Engineering A, 878(2023) 145199
14. Zhan Liu, Jinfeng Nie*, Yonghao Zhan, Effect of deformation processing on microstructure evolution and mechanical properties of Mg−Li alloys: A review，Transaction of Nonferrous metals Society of China  34(1)(2024)1-25
15. Yu-yao CHEN, Jin-feng NIE*, Yong FAN, Lei GU, Ke-wei XIE, Xiang-fa LIU , Yong-hao ZHAO, Enhancing strength–ductility synergy of AlNp/Al composite by regulating heterostructure of matrix grain and particle distribution, Transactions of Nonferrous Metals Society of China, 34(4)(2024)1049-4064
16. Jinfeng Nie*, Yanfang Liu, Fang Wang, Hao Zhou, Yang Cao*, Xiangfa Liu, Xianghai An, Xiaozhou Liao, Yuntian Zhu, Yonghao Zhao. Key roles of particles in grain refinement and material strengthening for an aluminum matrix composite, Materials Science and Engineering A, 801(2021) 140414.
17. Yue Yang, Xiang Chen*, Jinfeng Nie*, Kang Wei, Qingzhong Mao, Fenghua Lu, Yonghao Zhao*. Achieving ultra-strong Magnesium-lithium alloys by low-strain rotary swaging, Materials Research Letters, 9(2021) 255-262
18. Yangfang Liu, Fang Wang, Yang Cao*, Jinfeng Nie*, Hao Zhou, Huabing Yang, Xiangfa Liu, Xianghai An, Xiaozhou Liao, Yonghao Zhao, Yuntian Zhu. Unique defect evolution during the plastic deformation of a metal matrix composite, Scripta Materialia, 162 (2019) 316-320.
19. Jinfeng Nie, Fenghua Lu, Zhaowen Huang, Xia Ma, Hao Zhou, Cai Chen, Xiang Chen, Huabing Yang, Yang Cao, Xiangfa Liu*, Yonghao Zhao*, Yuntian Zhu. Improving the high-temperature ductility of Al composites by tailoring the nanoparticle network, Materialia, 9(2020) 100523.
20. 聂金凤*, 伍玉立, 谢可伟, 刘相法*. Al-AlN异构纳米复合材料的组织构型与热稳定性, 金属学报, 58(2022) 1497-1508.
21. Xinda Sun, Xiaojie Hao, Jinfeng Nie*, Yong Fan, Yuyao Chen, Sida Liu, Xiangfa Liu, Yonghao Zhao*. Microstructure and enhanced cryogenic tensile property of a heterostructured Al-AlN/Al-Mg composite fabricated by accumulative roll bonding (ARB), Journal of Materials Research and Technology, 21(2022) 523-545.
22. Kewei Xie*, Jinfeng Nie*, Xia Ma, Xiangfa Liu*. Increasing the ductility of heat-resistant AlNp/Al composites by submicron Al2O3 particles, Materials Characterization, 170(2020) 110672.
23. Huabing Yang, Kao Zhao, Jinfeng Nie*, Xiangfa Liu*. The enhanced super plasticity of a 2024 matrix nanocomposite reinforced by TiC particles, Materials Science and Engineering A, 774(2020) 138926.
24. Yuyao Chen, Jinfeng Nie*, Fang Wang, Huabing Yang, Chongchong Wu, Xiangfa Liu, Yonghao Zhao*. Revealing hetero-deformation induced (HDI) stress strengthening effect in laminated Al-(TiB2+TiC)p/6063 composites prepared by accumulative roll bonding, Journal of Alloys and Compounds, 815(2020) 152285
25. Jie Li, Jinfeng Nie*, Qingfei Xu, Kai Zhao, Xiangfa Liu*. Enhanced mechanical properties of a novel heat resistant Al-based composite reinforced by the combination of nano-aluminides and submicron TiN particles, Materials Science and Engineering A, 770(2020) 138488.
26. Fenghua Lu, Jinfeng Nie*, Xia Ma, Yusheng Li, Zhouwen Jiang, Yong Zhang, Yonghao Zhao, Xiangfa Liu*. Simultaneously improving the tensile strength and ductility of the AlNp/ Al composites by the particle's hierarchical structure with bimodal distribution and nano-network, Materials Science and Engineering A, 770(2020) 138519.
27. Lei Song, Fenghua Lu, Feng Jin, Jinfeng Nie*, Guiliang Liu, Yonghao Zhao*. Effect of Cold and Warm Rolling on the Particle Distribution and Tensile Properties of Heterogeneous Structured AlN/Al Nanocomposites, Materials, 13(2020) 4001.
28. Huabing Yang, Shuai Tian, Jinfeng Nie*, Zesheng You, Xiangfa Liu. High-temperature mechanical properties of 2024 Al matrix nanocomposite reinforced by TiC network architecture, Materials Science and Engineering A, 763(2019) 138121.
29. Jinfeng Nie, Fang Wang, Yuyao Chen, Qingzhong Mao, Huabing Yang, Xiangfa Liu, Yonghao Zhao*. Microstructure and corrosion behavior of Al-TiB2/TiC composites processed by hot rolling, Results in Physics, 14(2019) 102471.
30. Jinfeng Nie*, Yonghao Zhao, Yusheng Li, Fang Wang, Huabing Yang, Kaiqi Hu, Guiliang Liu, Xiangfa Liu*. Reactive synthesis of hexagonal Ti5P3.16 crystals and their heterogenous nucleating mechanism on primary Si, Journal of Alloys and Compounds, 777(2019) 8-17.
31. Ao Meng, Jinfeng Nie*, Kang Wei, Huijun Kang, Yonghao Zhao*. Optimization of strength, ductility and electrical conductivity of a Cu–Cr–Zr alloy by cold rolling and aging treatment, Vacuum, 167(2019) 329-335.
32. Yue Yang, Jinfeng Nie*, Qingzhong Mao, Yonghao Zhao*. Improving the combination of electrical conductivity and tensile strength of Al 1070 by rotary swaging deformation, Results in Physics, 13(2019) 102236.
33. Jinfeng Nie, Fang Wang, Yusheng Li, Yanfang Liu, Xiangfa Liu, Yonghao Zhao*. Microstructure and mechanical properties of Al-TiB2/TiC in situ composites improved via hot rolling, Transactions of Nonferrous Metals Society of China, 12(2017) 2548-2554.
34. Kewei Xie, Jinfeng Nie*, Kaiqi Hu, Xia Ma, Xiangfa Liu*. Improvement of high-temperature strength of 6061 Al matrix composite reinforced by dual-phased nano-AlN and submicron-Al2O3 particles, Transactions of Nonferrous Metals Society of China, 32(2022) 3197-3211.
35. Jinfeng Nie, Fang Wang, Yusheng Li, Yang Cao, Xiangfa Liu, Yonghao Zhao*, Yuntian Zhu. Microstructure evolution and mechanical properties of Al-TiB2/TiC in situ aluminum-based composites during accumulative roll bonding (ARB) Process, Materials, 109(2017) 1-13.
36. Jinfeng Nie, Mingxing Liu, Fang Wang, Yonghao Zhao*, Yusheng Li, Yang Cao, Yuntian Zhu. Fabrication of Al/Mg/Al Composites via Accumulative Roll Bonding and Their Mechanical Properties, Materials, 951(2016)1-14.
37. Jinfeng Nie*, Yonghao Zhao, Enzhao Wang, Xiangfa Liu*. Study on the evolution processes from TiCx to TiB2 induced by B in Al melt, Materials Characterization, 100(2015) 68-73.
38. Jinfeng Nie, Dakui Li, Enzhao Wang, Xiangfa Liu*. In-situ synthesis of SiC particles by the structural evolution of TiCx in Al–Si melt, Journal of Alloys and Compounds, 613(2014) 407-412.
39. Jinfeng Nie, Xiangfa Liu*, Yuying Wu. The influences of B dopant on the crystal structure and nucleation ability of TiCx in the Al melt, Materials Research Bulletin, 48(2013) 1645-1650.
40. Jinfeng Nie, Yuying Wu, Pengting Li, Hui Li, Xiangfa Liu*. Morphological evolution of TiC from octahedron to cube induced by elemental nickel, CrystEng Comm, 14(2012) 2213-2221.
41. Jinfeng Nie, Xiaoguang Ma, Pengting Li, Xiangfa Liu*. Effect of B/C ratio on the microstructure and grain refining efficiency of Al–Ti–C–B master alloy, Journal of Alloys and Compounds, 509(2011) 1119-1123.
42. Jinfeng Nie, Xiangfa Liu*, Xiaoguang Ma. Influence of trace boron on the morphology of titanium carbide in an Al–Ti–C–B master alloy, Journal of Alloys and Compounds, 491(2010) 113-117.
43. Jinfeng Nie, Xiaoguang Ma, Haimin Ding, Xiangfa Liu*. Microstructure and grain refining performance of a new Al–Ti–C–B master alloy, Journal of Alloys and Compounds, 486(2010) 185-190.
44. Huabing Yang, Tong Gao*, Huaning Zhang, Jinfeng Nie, Xiangfa Liu. Enhanced age-hardening behavior in Al-Cu alloys induced by in-situ synthesized TiC nanoparticles, Journal of Materials Science & Technology, 35(2019) 374-382.
45. Huabing Yang, Tong Gao, Haichao Wang, Jinfeng Nie, Xiangfa Liu*. Influence of C/Ti stoichiometry in TiCx on the grain refinement efficiency of Al-Ti-C master alloy, Journal of Materials Science & Technology, 33(2017) 616-622.
46. Tao Wang, Tong Gao, Jinfeng Nie, Pengting Li, Xiangfa Liu*. Influence of carbon source on the microstructure of Al-Ti-C master alloy and its grain refining efficiency, Materials Characterization, 83(2013) 13-20.
47. Kai Zhao, Tong Gao, Huabing Yang, Kaiqi Hu, Guiliang Liu, Qianqian Sun, Jinfeng Nie, Xiangfa Liu*. Enhanced grain refinement and mechanical properties of a high-strength Al-Zn-Mg-Cu-Zr alloy induced by TiC nano-particles, Materials Science and Engineering A, 806(2021) 140852.
48. Kai Zhao, Tong Gao*, Huabing Yang, Kaiqi Hu, Guiliang Liu, Jinfeng Nie, Xiangfa Liu*. Strengthening behavior of B doped TiC particles on an Al-Zn-Mg alloy, Composites Communications, 24(2021) 100649.
49. Lei Ren, Tong Gao, Jinfeng Nie, Guiliang Liu, Xiangfa Liu*. A novel core-shell TiCx particle by modifying TiCx with B element and the preparation of the (TiCx + AlN)/Al composite, Journal of Alloys and Compounds, 894(2022) 162448.
50. Kaiqi Hu, Tong Gao, Qingfei Xu, Huabing Yang, Xia Ma, Jinfeng Nie, Xiangfa Liu*. Investigation of the microstructures and mechanical properties of the Al-xSi-yAlNp composite by a diffusion method, Materials Science and Engineering A, 788(2020) 139634.
51. Wei Jiang, Hao Zhou, Yang Cao*, Jinfeng Nie, Yusheng Li, Yonghao Zhao, Megumi Kawasaki, Terence G. Langdon, Yuntian Zhu*. On the Heterogeneity of Local Shear Strain Induced by High-Pressure Torsion, Advanced Engineering Materials, 22(2020) 1900477
52. Zhaowen Huang, Yang Cao, Jinfeng Nie, Hao Zhou*, Yusheng Li*. Microstructures and Mechanical Properties of Commercially Pure Ti Processed by Rotationally Accelerated Shot Peening, Materials, 11(2018) 366
53. Yusheng Li*, Lingzhen Li, Jinfeng Nie, Yang Cao, Yonghao Zhao, Yuntian Zhu*. Microstructural evolution and mechanical properties of a 5052 Al alloy with gradient structures, Journal of Materials Research, 33(2017) 4443-4451
54. Ao Meng, Xiang Chen*, Jinfeng Nie, Lei Gu, Qingzhong Mao, Yonghao Zhao*. Microstructure evolution and mechanical properties of commercial pure titanium subjected to rotary swaging, Journal of Alloys and Compounds, 859(2021) 158222.
55. Chongchong Wu, Tong Gao, Jinfeng Nie, Liang Jiang, Xiangfa Liu*. In-situ synthesis of nano SiC particles in Al-Si-C system at 750 degrees C, Journal of Materials Research and Technology, 13(2021) 716-216.

教材：工程材料及热加工技术。徐跃，聂金凤，李玉胜，江金国编。

已授权发明专利：

1. 一种含高熵硼化物的铝基晶粒细化剂及其制备方法，聂金凤，智雅婷等，授权时间：2023.2

2. 一种多元碳化物颗粒增强铝基复合材料及其制备方法，聂金凤，范勇等，授权时间：2023.3

3. 一种制备高结合强度铜铬系复合材料的累积叠轧方法，聂金凤，王龙等，授权时间：2022.11

4. 一种高强度高塑性层状异构镁锂复合材料及其制备方法，聂金凤，刘站等，授权时间：2022.10

5.  高强度高塑性层状异构铝基复合材料及其制备方法，聂金凤，郝肖杰等，授权时间：2022.9

6. 一种异构层状铝基复合材料的制备方法，聂金凤，王芳等，授权时间：2022.6

7. 一种工业纯铝导线的制备方法，聂金凤，陆峰华等，授权时间：2022.7

8. 一种铝-镁-铝层状异构合金板材的制备方法， 聂金凤，陈玉瑶等，授权时间：2022.7

9. 一种高熵硼化物粉末及其制备方法，聂金凤，智雅婷等，授权时间：2022.2

10. 一种高强塑高刚度铝基复合材料及制备方法， 聂金凤，陈玉瑶等，授权时间：2022.5

11. 一种层状铝-铝基复合材料板材的制备方法，  聂金凤，陈玉瑶等，授权时间：2021.7

12. 一种外围包覆纯铝层的B4C增强铝基棒材及其制备方法， 聂金凤，宋磊等，授权时间：2021.5

13. 一种高强耐热异构铝合金导线及其制备方法，聂金凤，伍玉立等，授权时间：2021.7

14. TiCB-Al晶种合金、其制造方法及可遗传铝合金，刘相法，聂金凤等，授权时间：2021.7

15. 纳米AlN颗粒增强混晶耐热铝基复合材料及制备方法，聂金凤，陆峰华等，授权时间：2020.12

16.  一种超硬多元硼化物颗粒增强铝基复合材料及其制备方法， 聂金凤，范勇等，授权时间：2020.3

17. 一种铝-钛-碳-硼-氮中间合金及其制备方法，刘相法，聂金凤等（已产业化）

18. 一种铝-钛-磷-碳-硼中间合金及其制备方法，聂金凤，刘相法等，授权时间：2014.12

19.  一种铝-钛-铁-碳-硼中间合金及其制备方法，刘相法，王涛，聂金凤等。授权时间：2012.10

教授本科生课程《工程材料与热成形技术》、《材料失效分析》

指导研究生19名，协助指导博士生3名，已毕业硕士生14名

指导学生就业去向：就职于台积电（南京）有限公司、海尔集团公司、航天八院、中广核集团，硕士生陆峰华在上海交通大学读博深造，硕士生郝肖杰在金属所读博等。

本人隶属于纳米异构材料中心团队，团队执行主任赵永好教授，团队是集金属材料设计、制备、组织和性能调控、微观结构表征为一体的研究中心，中心拥有教师16名，团队学术氛围良好，科研设备齐全。