- 主学科0805 材料科学与工程【硕士生导师】
- 研究方向
纳米梯度结构材料
高强高导铜合金
高性能非均质结构钢
金属孪生行为研究
- 跨学科无
- 二级学科无
-
研究方向无
- 专业学位0856 材料与化工
-
研究方向无
工作经历
2012.5 - 现在 南京理工大学材料学院纳米结构材料中心,副教授/教授
2008.6 - 2012.4 贝卡尔特亚洲研发中心,研发创新经理
教育经历
2002.9-2008.6 中科院金属研究所 博士(导师:卢柯院士)
1998.9-2002.7 大连理工大学 学士
第一作者文章Acta Mater. 2008 (56): 230-241. 高被引论文(Top 50 Highly Cited Articles By Chinese Mainland Authors 2006-2010);
压电驱动金属表面纳米化加工技术及装置获2017 嘉兴“红船杯”全球创新创业大赛一等奖(第3名/680)
Acta Mater., Scripta Mater., J. Mater. Sci. Technol.等十余国际著名期刊审稿人
本人在Acta. Mater., Scripta. Mater., IJP等国际著名SCI期刊发表论文80余篇,被引2800余次。代表性的论著如下:
-
Y.S. Li, N.R. Tao, K. Lu, Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures, Acta Mater., 56 (2008) 230-241. 引用次数:488
-
Y.S. Li, Y. Zhang, N.R. Tao, K. Lu, Effect of the Zener–Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation, Acta Mater., 57 (2009) 761-772. 引用次数:166
-
Y.S. Li, Y. Zhang, N.R. Tao, K. Lu, Effect of thermal annealing on mechanical properties of a nanostructured copper prepared by means of dynamic plastic deformation, Scripta Mater., 59 (2008) 475-478. 引用次数:106
-
Z.W. Huang, S.B. Jin, H. Zhou, Y.S. Li*, Y. Cao*, Y.T. Zhu, Evolution of twinning systems and variants during sequential twinning in cryo-rolled titanium, Inter. J. Plasticity, 112 (2019) 52–67.
-
Z.W. Huang, P.L. Yong, H. Zhou, Y.S. Li*, Grain size effect on deformation mechanisms and mechanical properties of titanium, Mater. Sci. Eng. A (In press).
-
J.S. Li, S.Z. Wang, Q.Z. Mao, Z.W. Huang, Y.S. Li*, Soft/hard copper/bronze laminates with superior mechanical properties, Mater. Sci. Eng. A, 756 (2019) 213–218.
-
J.S. Li, Q.Z. Mao, S.Z. Wang, Y.S. Li*, Impact property of high-strength 316L stainless steel with heterostructures, Mater. Sci. Eng. A, 754 (2019) 457–460.
-
J.S. Li, C. Fang, Y.F. Liu, Z.W. Huang, S.Z. Wang, Q.Z. Mao, Y.S. Li*, Deformation mechanisms of 304L stainless steel with heterogeneous lamella structure, Mater. Sci. Eng. A, 742 (2019) 409–413.
-
Y.F. Wang, F.J. Guo, Q. He, L.Y. Song, M.S. Wang, A.H. Huang, Y.S. Li*, C.X. Huang*, Synergetic deformation-induced extraordinary softening and hardening in gradient copper, Mater. Sci. Eng. A, 752 (2019) 217–222.
-
Y.F. Wang, C.X. Huang*, M.S. Wang, Y.S. Li*, Y.T. Zhu, Quantifying the synergetic strengthening in gradient material, Scripta Mater., 150 (2018) 22–25.
-
J.S. Li, Y. Cao, B. Gao, Y.S. Li*, Y.T. Zhu, Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure, J. Mater. Sci., 53 (2018) 10442-10456.
-
Z.W. Huang, P.L. Yong, N.N. Liang, Y.S. Li*, Slip, twinning and twin-twin interaction in a gradient structured titanium, Mater. Charact., 149 (2019) 52-62.
-
J.S. Li, Q.Z. Mao, S.Z. Wang, Y. Zou, Y.S. Li*, Novel techniques for processing metallic materials with controllable soft/hard laminates, Mater. Lett., 246 (2019) 92–94.
-
Y.S. Li, L.J. Dai, Y. Cao, Y.H. Zhao*, Y.T. Zhu, Grain size effect on deformation twin thickness in a nanocrystalline metal with low stacking fault energy, J. Mater. Res., 34 (2019), 2398-2405.
-
S.Z. Wang, K. Wei, J.S. Li, Y.F. Liu, Z.W. Huang, Q.Z. Mao, Y.S. Li*, Enhanced tensile properties of 316L stainless steel processed by a novel ultrasonic resonance plastic deformation technique, Mater. Lett., 236 (2019) 342–345.
-
J.S. Li, W.D. Gao, Y. Cao, Z.W. Huang, B. Gao, Q.Z. Mao, and Y.S. Li*, Microstructures and mechanical properties of a gradient nanostructured 316L stainless steel processed by rotationally accelerated shot peening, Adv. Eng. Mater., 20, (2018) 1800402.
-
H. Zhou, H.Y. Ning, X.L. Ma, D.D. Yin, L.R. Xiao, X.C. Sha, Y.D. Yu, Q.D. Wang*, Y.S. Li*, Microstructure evolution and mechanical properties of Mg-9.8Gd-2.7Y-0.4Zr alloy produced by repetitive upsetting, J. Mater. Sci. Technol., 34 (2018) 1067–1075.
-
X. Wang, Y.S. Li*, Q. Zhang, Y.H. Zhao, Y.T. Zhu, Gradient Structured Copper by Rotationally Accelerated Shot Peening, J. Mater. Sci. Technol., 33 (2017) 758–761.
-
Y.S. Li*, L.Z. Li, J.F. Nie, Y. Cao, Y.H. Zhao, Y.T. Zhu, Microstructure evolution and mechanical properties of 5052 alloy with gradient structures, J. Mater. Res., 32 (2017) 4443-4451.
-
S.Z. Wang, J.S. Li*, Y. Cao, B. Gao, Q.Z. Mao, Y.S. Li*, Thermal stability and tensile property of 316L stainless steel with heterogeneous lamella structure, Vacuum, 152 (2018) 261-264.
-
Z.W. Huang, Y. Cao, J.F. Nie, H. Zhou*, Y.S. Li*, Microstructures and mechanical properties of commercially pure Ti processed by rotationally accelerated shot peening, Materials, 11 (2018).
-
J.S. Li, B. Gao, Z.W. Huang, H. Zhou, Q.Z. Mao, Y.S. Li*, Design for strength-ductility synergy of 316L stainless steel with heterogeneous lamella structure through medium cold rolling and annealing, Vacuum, 157 (2018) 128–135.
-
Y.F. Wang, J. An, M.S. Wang, K. Yin, Y.S. Li*, C.X. Huang, Improved mechanical behaviors and ultrafine grained microstructure of friction stir welded Cu and Cu-30Zn joints, Acta Metall. Sin-Engl., 31 (2018), 878-886.
-
W. Wei, C. Chang, T. Yang, J.Z. Liu, H.C. Tang, J. Zhang, Y.S. Li, F. Xu, Z.D. Zhang, J.F. Li, and G.D. Tang*, Achieving high thermoelectric figure of merit in polycrystalline SnSe via introducing Sn vacancies. J. Am. Chem. Soc., 140 (2018) 499−505.
-
D. Li, J.M. Li, J.C. Li, Y.S. Wang, J. Zhang, X.Y. Qin, Y. Cao, Y.S. Li, G.D. Tang, High thermoelectric performance of n-type Bi2Te2.7Se0.3 via nanostructure engineering, J. Mater. Chem. A, 6 (2018) 9642.
-
G.D. Tang, W. Wei, J. Zhang, Y.S. Li, X. Wang, G.Z. Xu, C. Chang, Z.H. Wang, Y.W. Du, L.D. Zhao, Realizing high figure of merit in phase-separated polycrystalline Sn1-xPbxSe, J. Am. Chem. Soc., 138 (2016) 13647-13654.
-
B. Yao, Z. Han, Y.S. Li, N.R. Tao, K. Lu, Dry sliding tribological properties of nanostructured copper subjected to dynamic plastic deformation, Wear, 271 (2011) 1609-1616.
-
Y. Zhang, Y.S. Li, N.R. Tao, K. Lu, High strength and high electrical conductivity in bulk nano-grained Cu embedded with nano-scale twins, Appl. Phys. Lett., 91 (2007) 211901.
(*为通讯作者)
1. 李玉胜,李建生,高波,聂金凤,曹阳,王帅卓,毛庆忠,一种高强塑性匹配316L不锈钢板材的制备方法,申请号:201810401456.7
2. 李玉胜,毛庆忠,朱运田,张庆,李建生,张逸卿,刘艳芳,高波,一种超细晶结构铜及铜合金线、棒材的制备方法,申请号:201810402817.X
3. 雍鹏凌,李玉胜,黄照文,李建生,何燕,一种非均质层状结构工业纯钛的制备方法,申请号:201711182464.9
4. 李玉胜,方超,李建生,高波,一种异质层状结构304L不锈钢的制备方法,申请号:201711160488.4
5. 李玉胜,黎毅力,朱运田,刘建,压电驱动金属表面纳米化加工装置,申请号:201611163918.3
6. 李玉胜,黎毅力,朱运田,刘泽军,张庆,刘瑛,多冲击表面纳米化及梯度结构加工装置,授权号:ZL201510725817.X
7. 李玉胜,黎毅力,朱运田,刘泽军,张庆,刘瑛,单冲击表面纳米化及梯度结构加工装置,授权号:ZL201510727648.3
8. 李建生,李玉胜,高波,雍鹏凌,一种异质层状结构316L不锈钢的制备方法,申请号:201711160489.9
9. 陶乃镕,李玉胜,卢柯,一种超高强度高导电率块体纯铜材料及制备方法,授权号:200510047555.2